![]()
![]()
补图
http://goo.gl/QlwIpm
2.0韧体更新步骤
http://lightsnowdev.blogspot.com/2014/09/olympus-om-d-e-m1-firmware-20.html
1.    Download the firmware: http://goo.gl/4dvkeV
2.    Create a folder called "DCOLYMP" on your SD-Card
3.    Rename the file to "E1092006.BIN"
4.    Put the SD-Card back into your camera and start it while pushing
      the OK button
      开启电源的同时,按著OK键
5.    The red LED will go on.
6.    Wait until it flashed on and off. This should take around 1-2 minutes.
7.    Wait a little longer (1-2 minutes) to be sure the firmware
      is completely flashed.
8.    Restart the camera.