1/28 Q&A part 2
- Super Pershing in HD will come “very soon”
HD 超潘“很快”就会推出
- HD IS-3 will keep the unhistorical BL-9 gun
不会拔掉 HD IS-3 上面不合史实的 BL-9 主砲
- current interation of HD IS-3 has 50913 polygons
目前的 HD IS-3 模型有 50913 个多边形
- in HD, various “paper” vehicles’ details will be modelled using analogy
to existing vehicles (for example, T110 like M103 and others)
当 HD 化时，图纸车的细节会用相似的史实车来类推（例如 E110 会用 M103 类推）
- HD models are now produced by both outsourcers and by WG internally
HD 模组目前是由外包商和 WG 共同制作
- Tiger II and T-62A in HD will also come relatively soon
虎王和 T-62A 将在近期 HD 化
- for now, the base color of German models will not be changed (SS: player
specifically asked from Feldgrau to Dunkelgrau)
目前不打算更换德国车的底色
- Storm states that when it comes to the frontal plate angles of HD IS-3,
everything should be alright
Storm 表示 HD IS-3 的车头装甲角度不会有问题
- M6A2E1 HD model is not ready yet
HD 大头 M6 还没好
- there will not be any new artillery branches in 2015
今年不会有新的自走砲线
http://ftr.wot-news.com/2015/01/28/28-1-2015-part-ii/
= = = = 以上补完 = = = =
- Storm confirms: artillery will have exactly the same shell distribution as
other the vehicles, the 9.6 nerf concerns arty too
Storm 证实，9.6 准度下修有考虑到自走砲，他们也会一体适用
- Storm is not aware of a plan to remove IS-6 from the shops
Storm 不知道 IS-6 有任何下架计画
- in 9.6, HD Ferdinand has an incorrect track movement (it behaves like if
the drive sprocket was in the front and not in the rear), it will be fixed
HD 肥男的履带动作有误（看起来动力轮在前），会修正
- there is a “legend” going on around RU forums about the IS-3 frontal
armor breaking up in welds after being shot at. Storm states that this
happened only once during the testing, after which the design of the frontal
nose part was reworked for this never to happen again.
IS-3 簇型车头被射击时会裂开的传说；Storm 表示那只在测试时发生过一次，变更设计
后就再也没发生过了
- it was proposed internally within WG to add Oddball’s Sherman from the
movie Kelly’s Heroes.
WG 内部有将 Kelly’s Heroes 这部电影里 Oddball 的雪曼加进 WoT 的建议
- the HD E-100 gun is of correct thickness and length
HD E-100 主砲长度和厚度都正确
- some details on the HD E-100 model will be reworked to higher details
HD E-100 会再细致化
- the 150mm upper front plate strip of HD E-100 model will remain 150mm
thick, its angle however will be fixed
HD E-100 的首上上半部会保持 150mm 的厚度，但是角度会修正
详见：http://i.imgur.com/Q7eCbuF.gif
- Storm confirms that gradually, fake or problematic (not very historical)
vehicles will be removed from the game, this includes current overbuffed
FV4202, FV215b (120) and WT E-100
Storm 证实，虚构或真实性有问题的车将逐渐被移除，名单包含 FV4202、FV215b (120)
和 WT E-100
（译者：之前提过 T28 也会换）
- another reason for WT E-100 replacement is the fact that it’s really hard
to balance, either it sucks or it gets overpowered
WT E-100 被移除的另一个原因是太难平衡：不是太强就是太烂
- HD IS-3 collision model is not developed yet, Storm will see if there are
any armor nerfs or buffs
HD IS-3 的装甲模组还没做，Storm 会关心是否有更动
- currently, WG developers are collecting photos of Batchat 25t rusty
prototype so they have more materials for its HD rework
目前 WG 正在蒐集 Batchat 25t 那台生锈原型车的照片，看看能不能收集多一些讯息
帮助 HD 化
- no ETA on IS-3 in HD “for various reasons”
HD IS-3 没有时间表，“很多原因啦”
- some models are created using the photogrammetry method, while others are
3D scanned. Photogrammetry is an alternative method, because the 3D scanner
can’t be used everywhere (SS: the background of this question is that I
asked Storm, why is WG waiting for a 3D scan of Action X turret from
Bovington, when they are using a different method here).
有些模型是用摄影测量法建模，而有些是用 3D 扫描。摄影测量法是无法使用 3D 扫描
时的备案。
HD IS-3 的最新图片：
http://ftr.wot-news.com/wp-content/uploads/2015/01/T4DnMkm.jpg
http://ftr.wot-news.com/2015/01/27/27-1-2015/
http://ftr.wot-news.com/2015/01/28/28-1-2015/