鲁鲁之前有妄想研究过 Boeing 类似的工作
虽然比较没那么强大
但基本上要求的是差不多的喔鸠咪
直接举个现在的栗子
SpaceX Mechanical Design Engineer
http://www.spacex.com/careers/position/8431
SpaceX was founded under the belief that a future where humanity is out
exploring the stars is fundamentally more exciting than one where we are not.
Today SpaceX is actively developing the technologies to make this possible,
with the ultimate goal of enabling human life on Mars.
SpaceX 相信未来人类不只杀猪公还可以上太空，最终目标殖民火星。
(这大概也是为什么要研究垂直起降的原因吧?)
Mechanical Design Engineer
机械设计工程师
Responsibilities:
‧Design of enclosures and mounting fixtures for individual avionics
components
‧Design and routing of wiring harnesses, and mechanical configuration of
top-level vehicle assemblies
‧Participate in initial mechanical design, 3D modeling, creation of
production drawings and maintenance of design data
‧Failure analysis of components as it relates to thermal, loads, vibration
and shock
‧Interface with the hardware design engineers to understand EMI/EMC
mitigation
‧Interface with machine shops and production teams to ensure final designs
can be produced in accordance with overall project goals
职位需求
‧设计航电+夹具
‧载具配线
‧3D建模+生产
‧高温、载、震动、冲击失败分析
‧电磁遮蔽设计
‧与生产团队合作
其实这个条件还满硬的，老实说老美很多台湾不可能玩到的学科技术
例如说爆炸力学 (炸药爆速与影响etc)
要懂高 G 力设计就是一个很大的门槛了，台湾研究到的系所大概不超过十间吧
公司的话，大概也只有公民营各 2~3 间
Basic Qualifications:
‧Bachelor’s Degree in Mechanical Engineering; must have excellent knowledge
of mechanical design principles
‧More than 3 years of overall industry experience in the design and
packaging of mechanical and electrical systems
‧Previous experience with parametric 3D modeling software for complex
top-level assemblies; Unigraphics is preferred
‧Experience with high-volume production designs – design for
manufacturability
基本资格
‧机械学位，设计专业
‧3 年工作经验机械 + 电子
‧3D 建模经验，会用 Unigraphics 最好
‧大量制造，可制造性分析
这边大概都老梗，不过我觉得有一点很值得关注的是
SpaceX 重视的是 "大量制造" 而不像 NASA 传统的高生产难度零件，很邱
Preferred Skills and Experience:
‧Master’s Degree in Mechanical Engineering
‧Experience in high production volume industries such as consumer
electronics, mobile phones or automotive backgrounds are highly preferred
‧Experience designing wiring harnesses and routing instructions for complex
assemblies
‧Some exposure to the design of machined parts
‧Working knowledge of thermal and structural FEA studies.
‧Excellent communication skills both written and verbal
‧Passion for advancing the commercial space industry and human spaceflight
‧Strong work ethic and drive to succeed
‧Ability to work in a fast paced, autonomously driven, and demanding
start-up atmosphere
偏好需求
‧硕士
‧超爱消费性电子产品的大量制造经验
‧复杂配线经验
‧零件加工经验
‧热、结构有限元素分系
‧英文读说
‧热情
‧道德+追求卓越
‧快速、自主、积极
Additional Requirements:
‧Must be available to work extended hours and weekends as needed
额外条件
‧加班加班，每周工作七天
********************************************************************
↓重点重点重点重点重点重点重点重点重点重点重点重点重点重点重点重点↓
********************************************************************
ITAR Requirements:
‧To conform to U.S. Government space technology export regulations,
applicant must be a U.S. citizen, lawful permanent resident of the U.S.,
protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to
obtain the required authorizations from the U.S. Department of State. Learn
more about ITAR here.
ITAR? 要求
‧需符合美国政府的航太技术出口法规
1. 申请人必须是美国公民，在美国的合法永久居民
2. 合乎依照8 U.S.C.定义保护个人1324b（一）（3）
3. 或有资格获得美国国务部所需的授权
1 + 2
简单来说如果你不是公民，就洗洗睡
就算你读完书拿到绿卡 + 公民，你父母、子女不是公民，还是洗洗睡
(Boeing 的条件写得比较清楚，限定一等亲都是公民且长年居住美国)
然后通过身家调查
3
就有趣了，他开一条后门
只要你够邱，够强，够猛。什么 1.2.3.4.5.6 公民子女的都不重要
我相信 SpaceX 会帮你递交特别申请案件给政府，然后就可以上班啦~
********************************************************************
↑重点重点重点重点重点重点重点重点重点重点重点重点重点重点重点重点↑
********************************************************************
电话 上班位置跟投履历的网址在这
Human Resources Department at (310) 363-6000.
Job Location
Hawthorne, CA, United States
http://0rz.tw/2EcQL
就不用谢我拉!