果然两个Router互相干扰而且打架了. 但是我对网管外行 Orz.. 不好意思再请教一下
(1) 主 中华电信 Modem-Router Dlink DSL-5540C (无wireless)
(2) 副 美国买的 D-link WBR-1310 (有wireless)
http://www.dlink.com/products/?tab=3&pid=WBR-1310&rev=WBR-1310
我去下载了Manual 请看第12页:
=============================================================================
Connect to Another Router
If you are connecting the D-Link router to another router to use as a
wireless access point and/or switch, you will have to do the following before
connecting the router to your network:
‧ Disable UPnP™
‧ Disable DHCP
‧ Change the LAN IP address to an available address on your network. The LAN
ports on the router cannot accept a DHCP address from your other router.
To connect to another router, please follow the steps below:
1. Plug the power into the router. Connect one of your computers to the
router (LAN port) using an Ethernet cable. Make sure your IP address on the
computer is 192.168.0.xxx (where xxx is between 2 and 254). Please see the
Networking Basics section for more information. If you need to change the
settings, write down your existing settings before making any changes. In
most cases, your computer should be set to receive an IP address
automatically in which case you will not have to do anything to your computer.
2. Open a web browser and enter http://192.168.0.1 and press Enter. When the
login window appears, set the user name to admin and leave the password box
empty. Click OK to continue.
3. Click on Advanced and then click Advanced Network. Uncheck the Enable UPnP
checkbox. Click Save Settings to continue.
4. Click Setup and then click Network Settings. Uncheck the Enable DHCP
Server server checkbox. Click Save Settings to continue.
5. Under Router Settings, enter an available IP address and the subnet mask
of your network. Click Save Settings to save your settings. Use this new IP
address to access the configuration utility of the router in the future.
Close the browser and change your computer's IP settings back to the
original values as in Step 1.
Connect to Another Router
===========================================================================
用GoogleVoice问到国外Dlink-Technician的解答是:
Router assign IP address. 所以两个 Router 接同一个 Network
会使电脑无法辨识确切的IP. 造成困惑无法运行. 一台电脑只能有一个Router
做法: (1)要求中华电信Disable 主Modem-Router的 Router功能
仅用 副Wireless-Router 做Router
=>这个我不考虑因为副Router去除Wan也只有四个Lan Port. 不够五个人用
(2)不用接副Router直接去光华商场买个Wireless Switch接主Modem-Router
=>这个可考虑: http://www.dlink.com/products/?pid=434
问题: 敝人以为应该是可以解决conflict的问题才是
如果可以的话想省钱研究一下。顺便学点电脑知识还蛮好玩的.
打中华电信Technician则是有的一问三不知，好像在唬烂装懂的 = =
好像要碰运气才能碰到真懂的.不过中华电信没有义务要帮我解决额外Router的问题就是.
啥呀...到底Dlink techinician讲的对不对? 我看完Manual以后很怀疑他是不是太武断呐...
明明Manual那页开宗明义就是在教我们设两个Router on the same Network.
其他的我都照Manual做都会了. 就红色标那段不知道IP怎么设.
有没有资工系的高手可以请教一下? 应该没有那么难吧. Technician的说法我真的觉得
很奇怪 = =+
不好意思对于网管真的外行不懂，如果知道的话请指点一下。感恩 ^^
※ 引述《Keelungman (金坷拉是新世界的神)》之铭言：
: 0. 找找那个要当client mode的router有没有 "uplink" 按钮?
: 有的话按下去就设定好了, 直接变client mode不用再设定下面的部分
: 1. 要当client mode的router开机, 先只跟一台电脑连
: 2. 电脑浏览器网址打192.168.0.1, 可开启router控制画面
: 3. 去做你文中的设定
: 4. 把这个router拿去接对外的那个router, 应该就大功告成
: 5. 日后若要把client mode的router变回来, 直接按下机器上的 default 或 reset
: ※ 引述《sophiacccc (simple beauty)》之铭言：
: : 前面的都没问题，就以下这两点技术上是不是能指导一下?
: : 2. Check / change IP address - Most home network routers use a default IP
: : address setting. Often, these default IP addresses will not work in a two
: : router environment. Check the second router's IP address value and reset it
: : if necessary to work within the valid address range of the first router (and
: : to not conflict with any other device on the network).
: : Google到 Dlink Router IP: 192.168.0.1
: : 不过请问一下黄线的地方要怎么化作实际步骤操作?
: : 讲得好像有点笼统? 还是就是以下所指示的?
: : 3. Disable DHCP - To avoid IP address conflicts between all of the devices on
: : the home network, only one of your two routers should assign addresses via
: : DHCP. All mainstream routers provide an option to disable DHCP as part of the
: : router's configuration screens.
: : 然后，应该是到 Router IP address 后就会有画面选项出现吧?
: : (￣▽￣＃)﹏﹏ 明天要去楼下设Router，如果有高手有经验，拜托指点一下。
: : 如果明天有操作上的错误或问题，可否再问一下? 抱歉占用版面了 = =||