http://madshi.net/madVR.zip
madVR v0.92.0
Code:
* added new "display modes" -> "custom modes" settings tab
* added support for native D3D11 DXVA hardware decoding (needs nightly LAV)
* added support for outputting 10bit in fullscreen windowed mode (win10)
* added optimized "let madVR decide" HDR configuration option
* added support for AMD's private HDR switching API
* added workaround for make Nvidia's private HDR switching API work better
* added full-size EDID block reading (256 bytes instead of just 128)
* added extended EDID parsing
* improved frame drop/repeat estimates for xx/1.001 hz modes
* fixed: deinterlacing of P010 software decoded videos was broken
madVR v0.92.1
* fixed: depending on madVR settings, v0.92.0 crashed right at initialization
* fixed: "display modes" were listed twice in the settings dialog
放出没多久就发现BUG秒更新...
这版拖很久阿...
主要更新我看大概是如下
有错误的地方请指证...
1.这次增加能设定萤幕的更新频率
使用了Nvidia，AMD和Intel的三家GPU API
不会像Reclock那种同步模式牺牲音质重采样
能办到完美流畅的拨放
可使用23~25hz模式拨放影片
给不想补帧的人使用
但我想也要萤幕能开
还是有点BUG...
自订模式教学
http://madvr.com/crt/CustomResTutorial.html
实际上真的是不错的东西
可以透过拨放影片找到最佳化的时序
2.增加了native D3D11 DXVA
需要使用needs nightly LAV Filters
https://files.1f0.de/lavf/nightly/
硬解品质说已经跟软解一样...效率比D3D9高
3.还有全萤幕视窗可以输出10bit了(Win10&8.1限定)
这个模式真是方便多了...
但我测试
反而选全萤幕独占模式
软件会崩溃...
4.让madVR自己决定HDR配置
5.支援AMD自己的HDR切换API
使用条件严苛了点
需要在10bit的D3D11全萤幕模式下才会开启
Nvidia的API能在窗口模式 8bit D3D11或者D3D9下执行
但要看完整的HDR还需要有萤幕跟片源