Re: [求救] 2019 MBP 13" + 10.15.6发热问题

楼主: Anddyliu (安滴滴)   2020-09-25 12:13:36
※ 引述《swim (嘿嘿)》之铭言:
: 小弟在去年买的MBP,
: 有更新必定更新,用到上上周开始,
: 盖起来放在包包后,发现MBP烫手,
: 平常也只有用来上网,开Chrome、Safari、Google同步与备份(工作用)、office、Li
ne
: 不知道有朋友跟我一样的吗?
: 而且,上次过热后,触控板可以滑动,手势也都可以用,按下去也有触控板的回馈力,
: 唯独要选择画面中的任何Icon,毫无反应,
: 求解广大的版友,不知道有没有跟我类似的朋友,
: 你们有解决这个问题吗?
: Thanks!!
先查看自己电脑的休眠状态设定
在终端机接口输入:pmset -g
解决放在包包内变热的问题
可以使用下列方法
打开终端机模式输入:
sudo pmset -a hibernatemode 25
https://i.imgur.com/jxTTV14.jpg
以下是苹果电脑的几种休眠状态
hibernatemode=0
这个状态意思是:by default is supported on desktops. The system will not back
memory up to persistent storage. The system must wake from the contents of the
memory (RAM). The system will lose context on power loss. Historically, this
is plain old sleep.
有需要这个模式的请在终端机输入:
sudo pmset -a hibernatemode 01
大部分人都是这个下面这个模式:
hibernatemode=3
这个解释为:by default is supported on portables or laptops. The system will s
tore a copy of memory to persistent storage (the disk), and will power memory
during sleep. The system will wake from memory, unless a power loss forces it
to restore from disk image.
同理,有需要的请输入:
sudo pmset -a hibernatemode 3
最省电的是下面这个模式:
hibernatemode=25
解释为最适合电池使用模式下的睡眠:is only settable via pmset. The system will
store a copy of memory to persistent storage (the disk), and will remove power
to memory. The system will restore from disk image. If you want hibernation—
slower sleeps, slower wakes, and better battery life you should use this setti
ng.
总结一下
– 0 = 内存持续供电,若断电的话资料全部消失
– 3 = 内存资料写到硬盘,内存持续供电,因此可以快速回复
– 25 = 内存资料写到硬盘,全电脑断电
作者: fir131 (李大威)   2020-09-25 12:46:00
3的状态应该 就不会有发热的情形了吧?
作者: waroz (沃君)   2020-09-25 13:24:00
你的高低电量要24小时跟3小时才正式进深度休眠还没进之前都有可能发热,把时间改短的话,应该3也可以
作者: swim (嘿嘿)   2020-09-25 21:06:00
感谢大大建议,我等等来试试,谢谢您!

Links booklink

Contact Us: admin [ a t ] ucptt.com