不好意思 我要做一个关于螺帽 螺杆所能承受最大应力的分析
以下是我的solidwoks图档以及条件示意图
https://drive.google.com/file/d/0B0PwPQ3KuvhQQWhaSGtJcWV0Y1U/view?usp=sharing
Force以及Fix图接如下
http://i.imgur.com/VADQ2Bi.jpg
http://i.imgur.com/qJ8kx3I.jpg
我的目的就是向外施力然后看螺帽及螺杆的螺纹会出现多大的应力
由于我的螺杆一直没办法mesh,所以我用内建的绘图slice两半在form new part就可以了
问题出在我接触设定只要是设定bonded就分析得出来
但是实际 Frictionless无摩擦可滑动 或者是 Frictionless存在摩擦
但是只要我设定这两个它就会无法分析
出现
An internal solution magnitude limit was exceeded. Please check your
Environment for inappropriate load values or insufficient supports. Also
check that your mesh has more than 1 element in at least 2 directions if
solid brick elements are present. Please see the Troubleshooting section of
the Help System for more information.
请问一下大家 我接触到底该如何设定才对