※ 引述《bluestar99 (蓝色微笑)》之铭言：
: 各位午安，我最近买了新喇叭，
: 想说再买个声卡搭配一下，
: 因为主机板没空间插PCIe只好选USB声卡，
: 以后买游戏主机也可以共用
: 于是选择了下面两款。
: Creative SOUND BLASTER G6 (USB外接声卡)
: Creative GigaWorks T40II
: 目前电脑直接接到T40II是没有问题的，
: 但是G6我的电脑好像读不到，安装了驱动程式却显示这画面，
: https://i.imgur.com/q5oFrJc.jpg
: 主机板是B85M-G
https://support.creative.com/kb/ShowArticle.aspx?sid=200075&c
The LEDs on the Sound BlasterX G6 are good indicators whether the sound card
is receiving power and being detected by your computer.
先看USB音效盒电源灯是否正常显示供电
Due to some external factors, computers may still not detect the sound card
even if the LEDs are illuminated:
USB port - It is recommended to connect the Sound BlasterX G6 directly to the
USB 2.0/3.0 port of your computer. Connecting the sound card to a USB hub may
yield some unforeseen issues. Try to connect the sound card to a known
working USB port to further isolate the problem.
把每个USB都测看看...
USB cable - Use the bundled USB cable to ensure detection of the sound card.
The bundled USB cable also works as a data cable.
你应该是用原厂线 这应该不是这问题
Firmware - The firmware of the sound card may be corrupted or the sound card
was in Recovery mode. The firmware upgrade process might have been
interrupted by accidental disconnection of the device. Possible causes
include but not limited to, loose contact on USB cable or port, power
failure, unintended computer shutdown or reboot, or interruptions caused by
Windows update of USB controller driver.
韧体.....感觉应该也不是这问题 这个机会很小
https://www.reddit.com/r/SoundBlasterOfficial/comments/amgkgn/
sound_blasterx_g6_not_detected_by_sound_blaster/
这个人跟你依样侦测不到
他的解决方法是........进安全模式安装驱动然后就找到了:
SOLVED IT. Had to dust off from troubleshooting options from over a decade
ago, but I solved it.
I eventually got an error during a series of desperate reinstalls of the
driver: "This operation requires an interactive windows station." Long story
short, booting into Safe Mode and installing the driver fixed all of my
issues. No reinstalling Windows, no messing around with ownership permissions
in system32, just a few clicks to get into Safe Mode.
It seems that problems with the driver are oddly common with the G6; maybe it
would be good for a help page somewhere to suggest this as a step, even
though Safe Mode is fairly basic troubleshooting.
你可以试看看....