※ 引述《naboo (大饼)》之铭言：
: 现在公司用的一支M705已经过保了，最近开始会有滚轮回滚的问题，试过板上建议的关闭平滑卷动还是没有用。
: 因为按键也开始有点连点的初期症状，所以打算自己换微动。
: 想说要换微动，就想问看看不知道是不是能有自己拆开换什么元件的方式可以修复？
: 还是只能换支新的了？回滚真的很烦，常常滚到要看的地方后，马上又因为回滚跑到其他地方.... Orz
我最近也发生回滚的状况,
鼠标还差几周就满三年,(美国是三年保)
于是赶快到美国罗技报修,
看可不可以换支新的.(憨眠...)
可惜没成功,
客服寄给我一封信写了落落长的步骤要我试试,
不过我只做了一个步骤,就修好了.
那就是把鼠标拔电池,然后按住左键的同时,再按右键五次,
左右互换再做一次,
然后把电池装回去,
回滚状态就消失了.
如果不成功的话,
详细步骤如下:
( Please follow each step )
1. Disconnect the device. Unplug the receiver.
2. Turn off your computer, then turn it on after 15 minutes.
3.Make sure you have fresh batteries installed on your device or fully charged
4.Try to drain the capacitor by taking the batteries out and hold the left
click mouse button while clicking the right 5 times and vice versa. Once
you're done, put the batteries back and test if it is working fine.(This
procedure will help your device to reset to perform better)
5. Reconnect the device, then check if the issue has been resolved.
6.It might be an encryption issue and we might need to establish a new
connection:
copy and paste this link for the unifying software
http://www.logitech.com/en-us/support/software/6254?section=downloads
choose your operating system
click download software under what's new at the very bottom
install it
open unifying software
click advance button
unpair the old connection of mouse
click the unifying receiver and click pair a new device
restart the device that you want to connect
test it
7. Plug in and test the device on another USB ports of the computer. If it is
connected through a hub, try connecting directly to the system ports to
verify the hub has not failed.
8. If you have multiple devices plugged into the computer, isolate the issue
by temporarily removing other USB devices on the computer and test the
device.
9. If it is possible, please try the device on other computer. This is to
check if the issue lies on the USB ports of your computer.